Are You Still Worried About Clothes Damaged by Hangers?
Wooden hanger is the mainstream of hanger market. Putting it in the cupboard will enhance the taste of the family’s host and hostess.Putting it in the mall exhibition will increase the charm of the products and make the clothes look more upscale. The manufacturing process of wooden clothes hanger is complicated, which is mainly divided into the following steps:
- Dry the wood, and natural drying is the best. However, due to the different climates in different places, it is recommended to select relatively stable wood, such as beech, rubber wood, manchurian ash, etc., otherwise cracking will occur.
- Customize the mold, cut the material, splice the hangers, make the appearance with a gong machine, polish and spray paint for many times.
- After the paint is dry, package it finally.
Next, I would like to share some key points of inspectors in factory inspection during hanger inspection, hoping to help you choose a suitable wooden hanger with good quality. The inspector will check the quality of wooden hangers from the following three basic points:
- Check the humidity of wood. If the moisture content is too high, the wooden hanger will easily deform. In addition to the hygrometer, during the hanger inspection, the inspector will soak a little water on the wooden hanger. Slow immersion or non-immersion means high water content.
- Odor inspection:during hanger inspection, the inspector will pay attention to the smell of hanger from the time of unpacking.If it has pungent smell,which will be reminded of clients in the report.
- Check the appearance of clothes hanger. Whether the surface is polished smoothly, with or without folds and wooden thorns. If the surface of hanger is not smooth, it is easy to damage clothes.
The following are the most common defects in hanger inspection:
- Appearance problems.
- Poor packaging leads to problems in transportation.
- Workers' omissions in the process of processing.
- Problems in product function test.
Poor assembly of metal parts
Break
Poor assembly
Poor assembly
Poor assembly of accessory
Poor assembly
Damage
Rust
Poor surface
Crack
Break
Deformation
Burrs
Crack
Rough surface
Rough surface
Break
Poor surface
Through the above pictures, hanger inspection helps you know in advance where the factory will cut corners. Such as splicing glue, good glue and inferior glue, its performance will directly affect the life of the product, and once the product cracks, it can not be used; The polishing of the product surface is not in place, the factory sells it directly without rework, and consumers will damage clothes during use; The material selection in the early stage is not in place, which leads to the product being easy to break and crack; Cheap metal parts are easy to rust. These are potential risks that may lead to consumer complaints.
Knowing the above information, when choosing a factory, the purchaser can ask some professional questions to the other party, and when checking samples, choose to check the appearance and function of products with more emphasis. Before shipment from the factory, if you are worried that the factory will cut corners and the quality of the bulk goods will be inconsistent with that of the samples, it is also the first choice for many suppliers to cooperate with a professional third-party inspection company. They will provide professional hanger inspection to ensure the quality of large goods from the above points. You can also entrust the arrangement for the new factory Comprehensive Factory Audit, know the factory situation in advance and then cooperate. All these will greatly reduce the quality risk of products and ensure the sales and user experience of products.
This article is an original article for CLI Inspection, who is committed to providing high-quality product inspection technology and know-how sharing for global importers and retailers to make imports safer.
All rights reserved. The contents of this website provided by CLI Inspection may not be reproduced or used without express permission.
For reprint, please contact with CLI Inspection, thank you.
