Today we are going to introduce a simple folding table. First of all, we need to make clear the client’s needs before making a targeted comparison. Thereby presenting the comparison results to all importers. The client who buys folding tables is a chain brand store, which mainly focuses on daily consumer goods. They mainly look for reliable suppliers through regular exhibitions. By chance, clients started using CLI Pre-shipment inspection service. The original purpose was only to clear customs, but after repeated quality feedback from CLI, clients realized the significance of inspection and began to formulate inspection rules for each batch of goods.
At this time, CLI provides a series of upgrade services to help importers analyze the quality of products from the process. For example, the production process comparison of folding tables will be shown below.
Make several kinds of products (trash cans, shoe racks, drying racks, folding tables and chairs), all of which are their own factories in the same industrial zone.
Mainly do tables and chairs, have their own steel pipe factory, management is not very good.
Jiangmen city, Guangdong province
Zhangzhou City, Fujian Province
Size in PL:58X38X66CM / 14MM(Tube)
Actual product size： 58x38x66CM / 18MM(Tube)
PL：1.5cm MDF board with PVC light top
Actual product size：58x38x67CM / 15MM(Tube)
Wooden and iron leg
MDF board and metal tube
4pcs/carton, single plastic bag
6pcs/carton, single plastic bag
The desktop is purchased. Made by pressing wood chaff,pasted with PVC surface, and then pressed by machine. The surface of the product is flat and the PVC film feels thick.
The desktop is purchased. Paste PVC film on the surface of MDF board. During the inspection, it was found that the PVC film at edge of the desktop on the back for 100% inspection samples was wrinkled. After inquiring the factory, it was found that it was manually pasted by workers and the PVC film was thin, so wrinkles appeared.
1)100% sampled products had uneven veneers at the edge
2)30% of the sampled products had extra plastic parts at the bottom
3)30% of sampled products had white marks on the back of dark models
4)40% of the sampled products had sawdust at the screw holes
Although the factory produces and sells a variety of products, the products and accessories are all produced by themselve. Their management is orderly and pay attention to product quality. Therefore, after many inspections, the products all meet the quality requirements.
From the cleanliness of the production line, the management of the factory is not in place and don’t plan the site reasonably. From this aspect, we can also see the control levelof product production, which is one of the reasons for the above defects.
This article is an original article for CLI Inspection, who is committed to providing high-quality product inspection technology and know-how sharing for global importers and retailers to make imports safer.
All rights reserved. The contents of this website provided by CLI Inspection may not be reproduced or used without express permission.
For reprint, please contact with CLI Inspection, thank you.
Senior professionals in the field of quality inspection are committed to finding and sharing valuable experiences.