After ironing the clothes, the clothes can be more smooth and achieve a three-dimensional and beautiful effect. During the manufacturing process and after the finished product is made, ironing is usually included in the clothing quality control required by the importer and its final effect is strictly checked. Clothing ironing can be generally divided into ironing in production and clothing ironing, which can be divided into small ironing, medium ironing and large ironing. In popular terms, small ironing refers to the initial lining, semi-finished products and ironing at zero position. Medium ironing is the operation of the setting-up process of each cut plate. The big ironing is the finishing ironing of ready-made clothes.
Small ironing mainly aims at pre – shrinking the cut pieces to prevent deformation of the garment pieces due to heating and humidification during medium ironing, which affects the size and specification of the garment. Therefore, when clothing quality control, factory needs to pay attention to the size and deformation of the finished product. If there is a deviation in size, it may be that the size is cut incorrectly or the small ironing process does not meet the requirements which is very important part of clothing quality control for manufacturing.
The purpose of medium ironing is not only to flatten cloth cover and seam allowance, but also to make ready-made clothes more in line with the curve change of human body and make up for the three-dimensional effect that cannot be achieved by the sewing process. Only when sewing and ironing are linked and matched well, the ready-made garments can ensure the good three-dimensional effect and dimensional stability, which is the product requirements of importers to be respected. On the contrary, it can be traced back to whether the clothing quality control in this process and the processing process meets the requirements and solve the defect problem in time.
3. The overall ironing
In the case that the garment ironing process is up to standard, the ironing often achieves twice the result with half the effort, because there is already a good intermediate ironing foundation before ironing, so the ironing process is relatively less time-consuming and can be used to as finishing touch, but the clothing quality control still cannot be ignored.
The above three steps of ironing and closeness quality control are closely linked and play a crucial role in whether the finished product is beautiful or not. Failure to meet the standards will definitely affect the product quality and garment shape, and serious cases may face the risk of being recalled.
4.Insufficient stereo modeling
5.The seams and pleats are uneven and so on
Importers can outsource third-party inspection agencies to make clothing quality control for finished products. International importers can often take the advantage of third party inspection agency’s quality inspection services, which conveniently help them consult with suppliers on the basis of the quality inspection reports of third parties, and can make up for the defects in the sewing process in time when problems are found in the inspection. This is so-called, advantages of outsourcing inspection, which definitely helps international importers greatly reduce less time cost and lower economic loss, to conduct the supply chain management.
This article is an original article for CLI Inspection, who is committed to providing high-quality product inspection technology and know-how sharing for global importers and retailers to make imports safer.
All rights reserved. The contents of this website provided by CLI Inspection may not be reproduced or used without express permission.
For reprint, please contact with CLI Inspection, thank you.
Senior professionals in the field of quality inspection are committed to finding and sharing valuable experiences.